User manual

Network Setup
106
Select the Port that you want associated with your newly created DNS name. You may
select Default Gateway Interface to have the CyberGuard SG appliance use the
external port of your Internet connection.
Enter the details provided by your dynamic DNS service provider and click Apply to
enable.
DHCP Server
Note
To configure your CyberGuard SG appliance as a DHCP server, you must set a static IP
address and netmask on the network interface on which you want the DHCP server to
run; see the Direct Connection section of the chapter entitled Network Connections.
To begin configuring the CyberGuard SG appliance’s DHCP server, select DHCP Server
from the Network Setup section of the web management console’s main menu.
DHCP configuration
Click the Edit icon next to the network interface on which you wish to edit or enable a
DHCP server.