User manual

Network Setup
104
System
To configure the CyberGuard SG appliance’s network system settings, click the System
tab on the Network Setup page. These settings control the CyberGuard SG appliance’s
identity on the network.
Hostname
The Hostname is a descriptive name for the CyberGuard SG appliance on the network.
It is also used as the SNMP sysName field. By default, this is set to the model name of
your CyberGuard SG appliance, e.g. SG710.
If network shares or printers are being shared, this is the computer name that is
displayed when browsing the network from a Windows PC (SG565 only).
Workgroup/Domain
Note
SG565 only.
The Workgroup/Domain is the Windows workgroup or domain with which to share
printers or network shares. These shared resources are not visible to machines on the
LAN that are not members of this workgroup or domain.
Administrative contact
You may enter the email address of the local administrator of the CyberGuard SG
appliance for use as the SNMP sysContact field.
Device location
You may also enter a short description of the physical location of the CyberGuard SG
appliance for use as the SNMP sysLocation field.
DNS
To configure the CyberGuard SG appliance’s DNS settings, click the DNS tab on the
Network Setup page. These settings control the CyberGuard SG appliance’s network
name services.