Specifications

Chapter 4 - MGCP Protocol Features Packages
74
Mediatrix 4100
XL Package Settings
There are no settings related to the XL package in the Mediatrix 4100 MIB structure.
Limitations to Using Line Reversal
Do not use the XL package in the following situations:
 When an endpoint of the Mediatrix 4100 rings
 When an endpoint of the Mediatrix 4100 uses caller ID
 When an endpoint of the Mediatrix 4100 uses the caller ID on Call Waiting
If the XL package is used in these cases, the ring is cancelled.
X-P Package
The X-P package is a special package that deals with tones.
 To set X-P package information:
1. In the mgcpMIB, locate the mgcpXPPackage group.
2. Set the mgcpXPPackageIrDuration variable.
This variable defines the initial ring timeout value in ms.
3. Restart the Mediatrix 4100 so that the changes may take effect.
The X-P package offers the following tone definitions:
Table 56: X-P Package Tones
Symbol Definition Duration
mp (pc=xx) Meter pulse
a
and pulse counts
a. A meter pulse is sent from the media gateway controller to the Mediatrix 4100 to indicate the
charge display has to be incremented.
BR (Brief)
ir Initial ring
b
b. Initial ring is sent from the media gateway controller to the Mediatrix 4100.
Timeout duration configurable
oc Report on completion
c
c. The event is triggered when the timeout signal completes successfully, e.g. initial ring.
N/A
of Report on failure N/A
pt1 Project specific tone 1 Timeout infinite
pt2 Project specific tone 2 Timeout infinite
pt3 Project specific tone 3 Timeout infinite
pt4 Project specific tone 4 Timeout infinite
pt5 Project specific tone 5 Timeout infinite
pt6 Project specific tone 6 Timeout infinite
pt7 Project specific tone 7 Timeout infinite
pt8 Project specific tone 8 Timeout infinite
pt9 Project specific tone 9 Timeout infinite
pt10 Project specific tone 10 Timeout infinite