Specifications

Endpoints Reference Manual (MGCP/NCS Version)
Mediatrix 4100
67
If you select includePtime, the ptime is included in the SDP packets whenever the ptime is provided
in the LocalConnectionOptions(LCO) parameters. Otherwise the ptime is never provided in SDP.
The ptime indicates the desired packetization interval that the offerer would like to receive.
The default value is excludePtime.
7. Restart the Mediatrix 4100 so that the changes may take effect.
Endpoints
Endpoints are originating or terminating devices such as telephones or faxes. This table contains the local
endpoint name. The endpoint name is created as follows: term2/term1@localHostFqdn.
These endpoint names are case insensitive. They can be made up of letters, digits or other printable
characters, with the exception of “/”, “@”, “*”, “$” and white space.
 To set endpoints information:
1. In the mgcpMIB, locate the mgcpEndpointIfTable group.
This table contains the endpoint information to set.
2. Set the following variables:
3. Restart the Mediatrix 4100 so that the changes may take effect.
In the Unit Manager Network Administration Manual, refer to chapter Signalling Protocols Parameters, section
MGCP Configuration Window.
Table 50: MGCP Endpoint Information
Variable Description
mgcpEndpointIdTerm1 The rightmost term of the local endpoint name.
E.g.: RSIP 725581549 aaln/3@[192.168.13.60]
mgcpEndpointIdTerm2 Second term from the right of the local endpoint name.
E.g.: RSIP 725581549 aaln/3@[192.168.13.60]
Default Value: aaln