Specifications

Services Reference Manual (MGCP/NCS Version)
Mediatrix 4100
49
3. Restart the Mediatrix 4100 so that the changes may take effect.
Syslog
The ipAddressConfigSyslog group provides the configuration necessary for contacting a Syslog server.
 To select the Syslog configuration source:
1. In the ipAddressConfig folder, locate the syslogSelectConfigSource variable (under the
ipAddressConfigSyslog group).
2. Set this variable to either static or dhcp.
3. Restart the Mediatrix 4100 so that the changes may take effect.
configFileFetching
Port
N/A Use option specified in variable
configFileFetchingDhcpSiteSpecificCode, bytes
4-5.
If not specified (0), use option 43, sub-option
201, bytes 4-5. If bytes 4-5 are not present, use
the default static value.
configFileFetching
StaticHost
“192.168.0.10” N/A
configFileFetching
Static Port
69 N/A
Table 33: Configuration File Fetching Source (Continued)
Variable Default Static Value DHCP Source
In the Unit Manager Network Administration Manual, refer to chapter Administration Parameters, section
Syslog Daemon.
Table 34: Syslog Source
Variable Default Static Value DHCP Source
syslogHost “192.168.0.10” Use option specified in variable
syslogDhcpSiteSpecificCode, bytes 0-3.
If not specified (0), use option 43, sub-option
110, bytes 0-3.
syslogPort 514
a
a. The port number is as per RFC 1340.
Not provided by the DHCP, use the default static
value.