Specifications

Switching Protocols Reference Manual (MGCP/NCS Version)

Mediatrix 4100

The Mediatrix 4100 has several configurable MIBs. All variables in these MIBs have been configured by

default upon start up. However, if you need to modify some of these variables, use a MIB browser.

Switching Protocols

You can switch between protocols and the proper settings are activated upon restart.

 To switch protocols:

1. In the telephonyMIB, locate the telephonyIpSignalingProtocol Selection variable.

This variable allows you to switch from one protocol to another. It can only be used to toggle

between the MGCP and NCS signalling protocols. Attempting to switch from MGCP/NCS to SIP or

from SIP to MGCP/NCS has no effect.

2. Set the telephonyIpSignalingProtocolSelection variable to either MGCP or NCS.

3. Restart the Mediatrix 4100 unit.

After the unit restarts, it uses the selected protocol. See:

• “Chapter 4 -

MGCP Protocol Features” on page 61

• “Chapter 5 - NCS Protocol Features” on page 85