Specifications

LED Indicators Reference Manual (MGCP/NCS Version)
Mediatrix 4100
17
Recovery Mode LED Patterns
There are two different sequences of LED patterns indicating that a recovery is in process.
At Start-Time
When pressing the Reset / Default switch at start-time, the state sequence goes as follows:
Figure 8: LED Pattern at Start-Time
At Run-Time
When pressing the Reset / Default switch at run-time, the state sequence goes as follows:
Figure 9: LED Patterns at Run-Time
LAN
(HW Ctrl)
Steady On Ethernet connection detected.
Steady Off Ethernet connection not detected.
Blinking (variable rate) Ethernet activity detected.
Power Blinking 1 Hz 75% Ready and Power LEDs blink off phase at 180 degrees.
Table 9: LED Patterns in AdminMode (Continued)
LED Pattern Meaning
Button Held Button Released
Booting RecoveryModePending RecoveryMode
Button Held After (5 sec)
Button Released
OpModes
ResetPending
RecoveryModePending
BootingRecoveryMode