Specifications

Chapter 1 - Installation LED Indicators
16
Mediatrix 4100
Booting LED Pattern Description
While in the Booting state, the LEDs of the Mediatrix 4100 behave independently; the following table indicates
the behaviour for each LED.
NormalMode LED Pattern Description
While in the NormalMode state, the LEDs of the Mediatrix 4100 behave independently; the following table
indicates the behaviour for each LED.
AdminMode LED Pattern Description
While in the AdminMode state, the LEDs of the Mediatrix 4100 behave independently; the following table
indicates the behaviour for each LED.
Table 7: LED Patterns in Booting Mode
LED Pattern Meaning
Ready Steady Off Not Ready.
In Use
Steady Off Cannot be in use.
LAN
(HW Ctrl)
Steady On Ethernet connection detected.
Steady Off Ethernet connection not detected or hardware control not activated.
Blinking (variable rate) Ethernet activity detected.
Power
Steady On Power is On.
Blinking 1 Hz 75% Waiting for a DHCP answer.
Table 8: LED Patterns in Operation Mode
LED Pattern Meaning
Ready
Steady On All lines are enabled (operational state).
Steady Off All lines are disabled (operational state).
Blink 0.25 Hz 75% At least one line is enabled and at least one line is disabled
(operational state).
In Use
Steady On At least one line is busy (usage state).
Steady Off All lines are not busy (usage state) or the unit is not connected to the
network.
LAN
(HW Ctrl)
Steady On Ethernet connection detected.
Steady Off Ethernet connection not detected.
Blinking (variable rate) Ethernet activity detected.
Power
Steady On Power is On.
Steady Off Power is Off.
Blinking 1 Hz 75% Waiting for a DHCP answer.
Table 9: LED Patterns in AdminMode
LED Pattern Meaning
Ready
Blinking 1 Hz 75% Ready and Power LEDs blink off phase at 180 degrees.
In Use Steady Off All analog lines are not available.