Specifications

Panels Reference Manual (MGCP/NCS Version)
Mediatrix 4100
7
See “LED Indicators” on page 14 for a detailed description of the LED patterns the Mediatrix 4100 may have
and the states they represent.
Port Numbering Convention (Mediatrix 4108/4116)
The following describes the port numbering conventions of the FXS connectors available on the Mediatrix
4108 and Mediatrix 4116. Note that the connectors in the left section are available only on the Mediatrix 4116
model.
Figure 3: FXS Connectors Port Numbering Convention (Mediatrix 4108/4116)
Analog Lines Numbering Convention (Mediatrix 4124)
The following describes the numbering conventions of the FXS analog lines available on the Mediatrix 4124.
Figure 4: Analog Lines Numbering Convention (Mediatrix 4124)
5. FXS
connectors
Eight RJ-11 connectors to attach conventional telephones or G3 fax machines.
These connectors are available on the Mediatrix 4108 and Mediatrix 4116 only.
6. Bypass Permits users to make and receive calls even when the Mediatrix 4100 is not
operating.
7. Ready LED When lit, at least one of the FXS lines configured to be registered with a Call Agent
is properly and successfully registered.
8. In Use LED When lit, at least one of the FXS lines is in use.
9. LAN LED Provides the state of the network connected to the ETH1 and ETH2 connectors
10. Power LED When lit, power is applied to the Mediatrix 4100.
11. Reset /
Default
button
Resets configuration parameters of the Mediatrix 4100 to default (known) values. It
can be used to reconfigure the unit. See “
Reset / Default Switch” on page 18 for
more details.
Table 4: Front Connectors and LEDs (Continued)
Connector
/ LED
Description
FXS
#16
FXS
#9
FXS
#15
FXS
#13
FXS
#11
FXS
#14
FXS
#12
FXS
#10
FXS
#8
FXS
#1
FXS
#7
FXS
#5
FXS
#3
FXS
#6
FXS
#4
FXS
#2
Analog Line #24 Analog Line #1