Specifications

Chapter 1 - Installation Panels
6
Mediatrix 4100
Panels
This section provides an overview of the front and rear panels of the Mediatrix 4100.
Front Indicators
Figure 2 shows the visual indicators and various connectors located on the front of the Mediatrix 4100.
Figure 2: Front Panel Indicators and Connectors
Table 4
describes the LEDs and connectors on the front panel of the Mediatrix 4100.
Table 4: Front Connectors and LEDs
Connector
/ LED
Description
1. ETH2 A 10/100 BaseT Ethernet RJ-45 connector that can be connected into the network
card of a computer. This connector may not be available on older models.
2. ETH1 RJ-45 connector for 100 BaseT Ethernet access to a LAN.
3. FXS
connectors
Eight RJ-11 connectors to attach conventional telephones or G3 fax machines.
These connectors are available on the Mediatrix 4116 only.
4. Analog
Lines
A RJ21X connector with 24 RJ-11 Teladapt connectors to provide line cord
connection to analog phones, faxes and modems. This connector is available on
the Mediatrix 4124 only.
See “
RJ21X Connector (Mediatrix 4124)” on page 203 for more details.
2
1
1
1
4
5
5
6
7
8
9
10
11
6
7
8
9
10
11
6
7
8
9
10
11
2
2
3