Specifications

Australia Reference Manual (MGCP/NCS Version)
Mediatrix 4100
211
Australia 2
The following parameters apply if you have selected Australia2 as location.
Table 139: Australia 2 Parameters
Parameter Value On – Off Sequence (s) Elect. Levels
Dial Tone 425 Hz * 25 CONTINUOUS -18 dBm
Busy Tone 400 Hz 0.375 – 0.375 -18 dBm
Ringback Tone 425 Hz * 17 0.4 – 0.2, 0.4 – 2.0 -17 dBm
Special Information Tone 950 Hz
1400 Hz
1800 Hz
0.333
0.333
0.333 – 1.0
-20 dBm
Stutter Dial Tone 425 Hz CONTINUOUS -18 dBm
Confirmation Tone 450 Hz (0.15 – 0.15 – 0.15) x 2 End -18 dBm
Receiver Off Hook (ROH) Tone 1400+2067+2467+2600 Hz 0.1 – 0.1 -21 dBm
Message Waiting Indicator Tone 425 Hz * 25 0.1 – 0.04, repeated during 10 seconds -18 dBm
Reorder Tone 425 Hz 2.5 – 0.5 -18 dBm
Call Waiting Tone 440 Hz 0.3 -17 dBm
Alernative Call Waiting Tone 440 Hz
440 Hz
440 Hz
440 Hz
0.3
0.1 – 0.1, 0.1
0.1 – 0.1, 0.1 – 0.1, 0.1
0.1 – 0.1, 0.3 – 0.1, 0.1
-17 dBm
-17 dBm
-17 dBm
-17 dBm
Network Congestion Tone 400 Hz 0.375 – 0.375 -18 dBm
Intercept Tone 425 Hz CONTINUOUS -18 dBm
Preemption Tone 425 Hz 0.8 -10 dBm
Ring AC: 45 VRMS, 25 Hz
DC: 15 Vdc
0.4 – 0.2, 0.4 – 2.0
Input Impedance 600 Ω
Default Caller ID BELLCORE
FXS Line Attenuation (Input) -3 dBr
FXS Line Attenuation (Output) -6 dBr