Specifications
Document Structure Reference Manual (MGCP/NCS Version)
Mediatrix 4100
xv
“Chapter 9 - Line Configuration” on page 129 Describes the features available on the lines
connected to the Mediatrix 4100.
“Chapter 10 - Voice Transmissions” on page 133
Describes the various codecs the Mediatrix 4100
supports for transmitting audio signals.
“Chapter 11 - Fax Transmission” on page 147
Describes how to perform fax transmissions in clear
channel and T.38 with the Mediatrix 4100.
“Chapter 12 - Bypass Configuration” on
page 153
Describes the Bypass feature that can be used in the
event of a power failure or network failure.
“Chapter 13 - STUN Configuration” on page 155
Describes how to configure the STUN client of the
Mediatrix 4100.
“Chapter 14 - SNTP Settings” on page 157
Describes how to configure the Mediatrix 4100 to
enable the notion of time (date, month, time) into it.
“Chapter 15 - Management Server
Configuration” on page 161
Describes how to configure the Mediatrix 4100 to
connect to a module or software that is used to
remotely set up Mediatrix units.
“Chapter 16 - Quality of Service (QoS)” on
page 163
Defines the QoS (Quality of Service) features
available on the Mediatrix 4100.
“Chapter 17 - Syslog Daemon” on page 167
Describes how to configure and use the Syslog
daemon.
“Chapter 18 - Statistics” on page 171
Defines the statistics the Mediatrix 4100 can collect.
“Chapter 19 - Maximum Transmission Unit
(MTU)” on page 175
Describes the MTU (Maximum Transmission Unit)
requirements of the Mediatrix 4100.
“Chapter 20 - Troubleshooting” on page 177
Examines some of the problems you may experience
when connecting the Mediatrix 4100 to the network
and provides possible solutions.
Appendices
“Appendix A - Standards Compliance and Safety
Information” on page 187
Lists the various standards compliance of the
Mediatrix 4100.
“Appendix B - Standard Hardware Information”
on page 195
Lists the technical hardware information of the
Mediatrix 4100.
“Appendix C - Cabling Considerations” on
page 201
Describes the pin-to-pin connections for cables used
with the Mediatrix 4100.
“Appendix D - Country-Specific Parameters” on
page 207
Lists the various parameters specific to a country such
as loss plan, tones and rings, etc.
Table 2: Mediatrix 4100 Reference Manual Chapter/Appendices (Continued)
Title Summary