Specifications

Chapter 8 - Software Download Download Procedure
120
Mediatrix 4100
Software Download Status
You can validate the status of the software download in various ways.
Syslog Messages
If you are using a Syslog daemon, you will receive messages that inform you of the software update status.
The following are the syslog messages the Mediatrix 4100 sends:
Table 88: Software Update Syslog Messages
Level Message Event
General Messages
Informational
The software update succeeded.
The software update has been successful.
Error
The software update failed.
The software update experienced an error and
has not been completed.
Error
The software update failed (xxx).
An error occurs when updating the software,
internal error code provided.
Warning
Primary image server not
specified, cannot download file:
xxx
This error occurs when an image download is
initiated and no domain name or address is
specified for the primary image server.
Warning
Secondary image server not
specified, cannot download file:
xxx.
When a request involving the primary server
fails, the secondary server is tried.
This error occurs when there is no address or
domain name specified for the secondary image
server.
Error
Cannot resolve address of image
server: xxx.
A DNS request failed to resolve the domain
name of the image server (primary or
secondary).
Error
Target image at location: xxx
from host: xxx is invalid or
corrupted.
For periodic and automatic updates, the target
image to download is first compared with the
installed image. This error occurs when this
comparison failed because of corruption in the
target image files.
Informational
Image download transfer
initiated.
When manual, periodic or “at restart” image
download is initiated.
Warning
The file: xxx from host: xxx
exceeds the size limit.
The selection file or “setup.inf” file received
exceeds 10000 bytes.
Informational
Target image at location: xxx
from host xxx is identical to
currently installed image.
Transfer aborted.
For periodic and automatic updates, the target
image to download is first compared with the
installed image. This message occurs when this
comparison determined that the target image is
identical to the installed image.
Error
Image does not support hardware
(error %d)
The software download failed because the
software image is not compatible with the
hardware.
HTTP-Specific Messages
Warning
HTTP image transfer of file: xxx
from host: xxx was closed by
peer.
The HTTP transfer was closed by the peer.