Specifications

Software Servers Configuration Reference Manual (MGCP/NCS Version)
Mediatrix 4100
117
See “Vendor and Site Specific DHCP Options” on page 53 for more details.
Static Configuration
Use the static configuration if you are not using a DHCP server or if you want to bypass it.
 To use static information:
1. In the ipAddressConfig folder, locate the imageSelectConfigSource variable.
This variable defines whether the Mediatrix 4100 must ask for its Image server settings through a
DHCP server or not.
2. Set the imageSelectConfigSource variable to static.
3. Set the following variables:
The default port value complies to RFC 1340 on the well-known ports (assigned numbers). This
value (69) applies to a TFTP server. It may be different for other servers. If you are using an HTTP
server, you must change the port value to 80.
site specific code The imageDhcpSecondarySiteSpecificCode variable to any value
between 128 and 254. Set the Secondary image server IP address in the
DHCP server inside the site specific option you have chosen (it must
match the value of the imageDhcpPrimarySiteSpecificCode variable in
the unit’s configuration).
Table 84: Secondary Image Server DHCP Information (Continued)
To use a... Set...
Table 85: Image Static Information
Variable Description
imageStaticPrimaryHost Static primary image server IP address or domain name. This is
the current address of the PC that hosts the files required for the
download (extracted from the zip file).
Default Value: 192.168.0.10
imageStaticPrimaryPort Static primary image server IP port number.
Default Value: 69
imageStaticSecondary
Host
Static secondary image server IP address or domain name. This is
the current address of the PC that hosts the files required for the
download (extracted from the zip file).
Default Value: 192.168.0.10
imageStaticSecondaryPort Static secondary image server IP port number.
Default Value: 69