Specifications

Configuration File Download Server Reference Manual (MGCP/NCS Version)
Mediatrix 4100
103
Syslog Messages
A lot of information is transmitted as system log (syslog) messages. The following are some of the syslog
messages sent by the unit:
Configuration Files Encryption
You can secure the exchange of configuration files between the server and the Mediatrix 4100. A privacy key
allows the unit to decrypt a previously encrypted configuration file. This applies to files downloaded via TFTPor
HTTP.
To encrypt a configuration file (generic or specific), you must use the MxCryptFile application. MxCryptFile is
a command line tool that encrypts files before sending them to the Mediatrix 4100 unit. Contact your sales
representative for more details.
Configuration File Decryption on the Mediatrix 4100
The following describes how to decrypt a previously encrypted generic or specific configuration file. You must
have one key for the generic configuration file and another key for the specific configuration file.
 To decrypt a configuration file:
1. In the configFileFetchingMIB, set the proper decryption variable with the secret key used to decrypt
the configuration file.
Table 77: Configuration File Download Syslog Messages
Level Message Event
Informational
The specific configuration update
succeeded.
The configuration update with the specific
configuration file has been successful.
Error
The specific configuration update
failed.
The configuration update with the specific
configuration file experienced an error and
has not been completed.
Informational
The configuration file “XXX” was
successfully fetched.
A configuration file was successfully
fetched.
Informational
The unit configuration is not
updated. The parameter values defined
in the fetched configuration files
are identical to the actual unit
configuration.
The parameter values defined in the
fetched configuration files are identical to
the actual unit configuration.
Informational
The generic file \”%s\” parameter
values are not applied. They are
either identical to the unit
configuration or overwritten by the
specific file.
The generic configuration file parameter
values are either identical to the unit
configuration or overwritten by the specific
configuration file.
Warning
None of the parameter values defined
in the configuration file \”%s\” was
successfully applied.
No parameter value from a fetched
configuration file was successfully applied
(e.g., because of bad OIDs).
Informational
Parameter values defined in the
configuration file \”%s\” were
successfully applied.
A fetched configuration file was
successfully applied.
Informational
The unit is restarting to complete
the configuration update.
All necessary fetched configuration files
were successfully applied.
Table 78: Decryption Variables
Configuration File Variable
Generic configFilePrivacyGenericSecret