Specifications

Line Package Reference Manual (MGCP/NCS Version)
Mediatrix 4100
91
Line Package
The Line package groups variables that determine tone timeouts of the NCS protocol Line Package.
 To set Line package information:
1. In the ncsMIB, locate the ncsLinePackage group.
This group contains the information to set.
2. Set the following variables:
Table 71: NCS Line Package Information
Variable Description
ncsLinePackageBzDuration Busy tone timeout value in ms. It indicates the line or
equipment is in use, engaged or occupied.
Default Value: 30000
ncsLinePackageDlDuration Dial tone timeout value in ms. It indicates the line is ready to
receive dialing.
Default Value: 16000
ncsLinePackageLDuration DTMF long duration timeout value in ms. It is observed when
a DTMF signal is produced for a duration longer than two
seconds. In this case, the Mediatrix 4100 will detect two
successive events: first, when the signal has been
recognized, the DTMF signal, and then, 2 seconds later, the
long duration signal.
Default Value: 2000
ncsLinePackageMwiDuration Message waiting indicator tone timeout value in ms. It
indicates there is a message waiting somewhere for the
owner of the phone.
Default Value: 16000
ncsLinePackageOtDuration Off hook warning tone timeout value in ms. It indicates that the
telephone is not hung up correctly.
Default Value: 65535000
ncsLinePackageRbkDuration Ring back on connection tone timeout value in ms. It is the
sound one hears when calling someone else’s phone.
Default Value: 180000
ncsLinePackageRgDuration Ring tone timeout value in ms. It indicates the called line is
ringing out.
Default Value: 180000
ncsLinePackageRoDuration Reorder tone (also called fast busy) timeout value in ms. It
indicates that all switching paths are busy, all toll trunks are
busy, there are equipment blockages, the caller dialed an
unassigned code, or the digits dialed got messed up along the
way.
Default Value: 30000
ncsLinePackageRtDuration Ring back tone timeout value in ms.
Default Value: 180000