Specifications

Chapter 4 - MGCP Protocol Features Interoperability Configuration
84
Mediatrix 4100
Brackets Around IP Address in Domain Name
When the configured domain name is an IP address, you can define whether or not to add brackets around
the endpoint's domain name.
 To add brackets around the IP address:
1. In the mgcpncsExperimentalMIB, set the
mgcpncsBracketsAroundIpAddressInDomainNameEnable variable with the proper behaviour.
Polarity Reversal on Calling Card Service Tone
You can define whether or not a polarity reversal must be performed before playing the calling card service
tone when receiving the S:L/z signal request.
 To enable polarity reversal on calling car service tone:
1. In the mgcpncsExperimentalMIB, set the
mgcpncsPolarityReversalOnCallingCardServiceToneEnable variable with the proper behaviour.
Table 64: Brackets around the IP Address
Parameter Description
disable Brackets are not added around the IP address, e.g.: aaln/1@192.168.0.1.
enable Brackets are added around the IP address, e.g.: aaln/1@[192.168.0.1]. This is the
default value.
Table 65: Polarity Reversal on Calling Card Service Tone
Parameter Description
disable Calling card service tone signal request is handled normally.
enable A polarity reversal is performed before handling the calling card service tone signal
request.