User manual

Introduction
8
Your CyberGuard SG Rack Mount Appliance
CyberGuard SG rack mount appliances include:
• SG710
• SG710+
The following items are included with your CyberGuard SG rack mount appliance:
• Power cable
• Installation CD
• Printed Quick Install guide
• Cabling including
o 1 normal straight through UTP cable (blue color).
o 1 crossover UTP cable (either gray or red color)
Front panel LEDs
The front panel contains LEDs indicating status. An example of the front panel LEDs are
illustrated in the following figure and detailed in the following table.
Figure 1-3
Label Activity Description
Power
On Power is supplied to the CyberGuard SG appliance
Flashing The CyberGuard SG appliance is operating correctly H/B (Heart Beat)
On If this LED is on and not flashing, an operating error
has occurred
Failover
On The CyberGuard SG appliance has switched to the
backup Internet connection
High Avail
On Reserved to indicate failover to a backup device
(available in a future firmware release)
Online
On An Internet connection has been established