Installation guide

Note: If there is more than one existing network connection, select the one

corresponding to the network interface card to which the SG unit is

attached.

c. Select Internet Protocol (TCP/IP) and click Properties. The Internet

Protocol (TCP/IP) Properties dialog box is displayed.

d. Select Use the following IP address and enter:

• IP address: 192.168.0.100

• Subnet mask: 255.255.255.0

• Default gateway: 192.168.0.1

e. Select Use the following DNS server addresses and enter:

• Preferred DNS server: 192.168.0.1

Note: If you want to retain your existing IP settings for this network

connection, click Advanced and add the secondary IP address of

192.168.0.100, subnet mask 255.255.255.0.

DESK_BODY.fm Page 7 Thursday, June 14, 2007 8:29 AM