Installation guide

Step 8 — Register your SG unit

Quick setup is now complete. Quick setup is all you need to do to get basic

network connectivity to the Internet. Network devices on the LAN should

now be able to access the Internet in accordance with the settings you

have configured and provided all physical network connections are in

place.

You must register your SG unit in order to receive technical support. A

current e-mail address is required to register your product. For prompt

product registration, go to the following Web site:

http://my.securecomputing.com

Step-by-step procedures for registering your device and activating add-on

features are provided in the Introductory chapter of the SnapGear

Administration Guide.

Further reading

For detailed configuration information, refer to the SnapGear

Administration Guide, which is available on the SG CD in the /docs

directory, and from the Product Manuals link in the SnapGear

knowledgebase:

http://sgkb.securecomputing.com

You can also access the product manuals from the Resource Center >

Product Manuals location on the Securing Computing Web site; located

at:

http://www.securecomputing.com/techpubsRC.cfm

Select SnapGear from the Product list and click Go.

Advanced configuration

Use the menu in the SnapGear Web Management Console to configure

more sophisticated security settings and networking features such as VPN.

Refer to the SnapGear Administration Guide, the online help, and the

SnapGear KB for further configuration information.

DESK_BODY.fm Page 21 Thursday, June 14, 2007 8:29 AM