Installation guide

Step 7a — Automatic LAN configuration using the SG DHCP

server

By selecting Manual Configuration for the SG unit's LAN connection, and

supplying the DHCP Server Address Range, the SG unit's DHCP server is

already set up and running. Each PC on your LAN must now be set up to

automatically obtain network settings.

a. Click Start > (Settings >) Control Panel and double-click Network

Connections. If presented with multiple connections, right-click Local

Area Connection (or appropriate network connection) and click Prop-

erties.

b. Select Internet Protocol (TCP/IP) and click Properties.

c. Click Obtain an IP address automatically, click Obtain DNS server

address automatically and click OK.

DESK_BODY.fm Page 18 Thursday, June 14, 2007 8:29 AM