Installation guide

16
 Otherwise, select 4 LAN Ports.
b. Click Next. The confirm Settings page appears.
Step 6 — Confirm settings; connect the SG unit to your
LAN
a. Review your configuration selections.
.
b. If you are satisfied with your settings, click Finish to activate the new
configuration.
Note: If you changed the SG unit's LAN connection settings, it may
become uncontactable at this point. The next step describes how to set up
the PCs on your network to access the SG unit and the Internet.
DESK_BODY.fm Page 16 Thursday, June 14, 2007 8:29 AM