Installation guide

14
q. Click Next.
 If you chose DHCP, the Confirm Settings page appears if you are
setting up an SG300. Go to Step 6 — Confirm settings; connect
the SG unit to your LAN on page 16. For all other desktop models,
the Switch Configuration page appears. Go to Step 5 — Configure
the switch on page 15.
 If you chose Manual Configuration, the ISP Connection page for
manually configuring the WAN interface appears.
.
r. In the IP Address field, enter the static IP address you want to apply
to the WAN port of the appliance.
s. Enter the Subnet Mask you want to use for the WAN port.
t. [Optional] Set the default Gateway Address.
u. [Optional] Set the IP address of the Domain Name Server.
v. Click Next. The Switch Configuration page appears for most models.
Go to Step 5 — Configure the switch on page 15. Otherwise, if you are
setting up an SG300, the Confirm Settings page appears. Go to Step 6
— Confirm settings; connect the SG unit to your LAN on page 16.
DESK_BODY.fm Page 14 Thursday, June 14, 2007 8:29 AM