Installation guide

13
For all other desktop models, the Switch Configuration page
appears. Go to Step 5 — Configure the switch on page 15.
 If you selected Skip, the next page that appears depends on the
SnapGear model you are setting up. If you are setting up an
SG300, the Confirm Settings page appears. Go to Step 6 —
Confirm settings; connect the SG unit to your LAN on page 16.
For all other desktop models, the Switch Configuration page
appears. Go to Step 5 — Configure the switch on page 15.
 If you selected Direct Connection, the ISP Connection page for
choosing a dynamic or static WAN interface appears. Continue
with the next step.
.
p. Select an option for ISP connection.
 DHCP — Select this option if you plan to use a DHCP server
already in use on your LAN.
 [Recommended] Manual configuration — Select this option to
manually configure the WAN address using static parameters.
DESK_BODY.fm Page 13 Thursday, June 14, 2007 8:29 AM