Installation guide

12
m. Click Next. The ISP Connection page appears.
.
n. Select an option for your Internet Port Configuration:
 If you are connecting using a cable modem, select Cable Modem.
 If you are connecting using a regular analog modem, select
Modem.
 If you are connecting using an ADSL modem, select ADSL to
attempt automatic detection of your ADSL connection type.
 If you have a direct connection to the Internet (e.g., a leased line),
select Direct Connection.
 If your Internet connection is already configured, or you want to
defer its configuration, select Skip.
o. Click Next. The page that appears depends on your selection in the
ISP Connection page:
 If you selected Cable Modem, Modem, or ADSL, configuration
pages for those options are presented to you for you to complete.
Refer to the onscreen instructions, online help, and the SnapGear
Administration Guide for more details. When you finish entering
your details, the next page that appears depends on the
SnapGear model you are setting up. If you are setting up an
SG300, the Confirm Settings page appears. Go to Step 6 —
Confirm settings; connect the SG unit to your LAN on page 16.
DESK_BODY.fm Page 12 Thursday, June 14, 2007 8:29 AM