Installation guide

11
j. Click Next.
 If you did not select Manual configuration, skip to step m on
page 12.
 If you selected Manual configuration, the Manual LAN
Configuration page appears.
.
k. Enter an IP address and Subnet Mask for the SG unit's LAN connec-
tion. Take note of the IP address and subnet mask; you will need them
later on.
l. To enable the SG unit's built-in DHCP server, enter a range of
addresses in DHCP Server Address Range. PCs and other hosts on
your LAN set to automatically obtain network settings are assigned an
address from this range, and use the SG unit as their gateway to the
Internet, and as their DNS server for Internet domain name resolution.
Or, if you plan to use a DHCP server already on your LAN, leave the
field blank to leave the SG unit’s DHCP server disabled.
DESK_BODY.fm Page 11 Thursday, June 14, 2007 8:29 AM