Installation guide

10
g . The LAN page of the quick setup wizard appears.
.
h. Enter a Hostname to identify the SG unit. The name must begin with
an alpha character. The hostname defaults to the model number.
i. Select an option for your LAN configuration:
 [Recommended] To manually configure your LAN and optionally
enable the SG unit's built-in DHCP server, which automatically
configures the network settings of PCs and other hosts on your
LAN, select Manual configuration.
 To use the SG unit's initial network settings (see page 6) as a
basis for your LAN settings, and not use the SG unit's built-in
DHCP server, select Skip: LAN already configured.
 [Not recommended] If you have an existing DHCP server, and
want to rely on the DHCP server to automatically configure the SG
unit's LAN connection setting, choose Obtain LAN IP address
from a DHCP server on LAN.
Note: Changes to the SG unit's LAN configuration do not take effect until
you complete the quick setup wizard.
DESK_BODY.fm Page 10 Thursday, June 14, 2007 8:29 AM