Specifications

Server Procedure 930335A CyberData Corporation

1.0 Introduction

RingCentral does not presently offer native support for Intercom and paging systems. There are,

however, third-party VoIP/SIP based Intercom and paging systems that can work with the

RingCentral service as a third-party device. RingCentral cannot provide full support for these

devices, but we have documented the basic configuration of one such system sold by CyberData.

You can get more information on the CyberData system, including where to buy, here:

http://www.cyberdata.net/products/voip/digitalanalog/index.html. The website includes

product videos and other information to help you learn about the system’s capabilities.

The CyberData products are highly capable and configurable, and can meet almost any paging and

Intercom need in a variety of ways. The complete configuration scope for these products is well

beyond the scope of this document. In this document we discuss configuring for basic use cases, and

how to connect it to your RingCentral account. For more complex configuration, please review the

CyberData documentation or contact them and their authorized vendors for additional assistance.

The following products are covered in this document:

• Ceiling Speaker v2

• Configuration would be nearly identical for the wall mount speaker with clock

• There is a new ceiling speaker scheduled for release that includes two-way talkback – the

configuration will likely be very similar

• Outdoor Intercom

• Configuration would be nearly identical for the indoor Intercom and emergency indoor

Intercom

• Paging amplifier v2

• Configuration would be nearly identical for the Loudspeaker amplifier

•Paging server