Specifications

Configuring your RingCentral Account
Server Procedure 930335A CyberData Corporation
11
4.0 Configuring your RingCentral Account
You’ll need a RingCentral account with one available line for each paging device you need to
register. Generally this would be only 1 line needed. If you need only 1 paging speaker, you use a
single ceiling or wall speaker. If you need multiple paging speakers you can use a Paging Server or
amplifier, or the auxiliary connection from the ceiling speaker. In this way you can use multiple
speakers with one RingCentral line. If you are also using an Intercom you’ll need a separate line for
each Intercom.
4.1 Set up your RingCentral account:
4.1.1 If you don’t have a RingCentral account, set up your account here
. Add an additional line
for the paging extension and select No Device as your phone.
4.1.2 If you already have an account, use your existing lines or add a new line from the
RingCentral service site
using Add DigitalLines as shown in Figure 6. Select No Device
when prompted to choose a phone.
Figure 6. Adding DigitalLines: