Product specifications

Installing the VoIP V2 Paging Amplifier

Configure the Paging Amplifier Parameters

Operations Guide 930363A CyberData Corporation

6. Click the Update Firmware button to open the Upgrade Firmware page. See Figure 2-14.

Figure 2-14. Firmware Upgrade Page

Note Figure 2-14 shows the factory default settings.

7. Enter the IP address of your TFTP server into the TFTP Server IP parameter field.

8. Enter the firmware filename of the file to be uploaded into the New Filename parameter field.

For example, kernel filename 100-uImage-pagingamp.bin.

9. Click Upload File.

Note This starts the upload process. Once the Paging Amplifier has uploaded the file, the

Uploading Firmware countdown page appears, indicating that the firmware is being

written to flash. The Paging Amplifier will automatically reboot when the upload is

complete. When the countdown finishes, the Upgrade Firmware page will refresh. The

uploaded firmware filename should be displayed in the system configuration (indicating

successful upload and reboot).