Specifications

RingCentral Office 14 To contact RingCentral, please visit www.ringcentral.com or call 1-800-574-5290.
Sensor Config – This features lies beyond the scope of this document.
Multicast Config – Configures how the amplifier responds to multi-cast packets. Edit this option if you plan to use
the amplifier as a member of a group using the Paging Server. If you are not using the paging server, do not edit
this option. Otherwise, configure it as follows:
Check the box labeled 1. Enable Multicast operation.
Note: The system has the capability to listen to multiple addresses at different priorities.
For this configuration overview, we assume you are only using one and will put it on priority 8.
In the row next to 2. 8, enter the multi-cast address you used to configure your paging server into the ad-
dress field. The default value is 224.224.224.224.
In the same row, enter the port you used to configure your paging server into the port field. The default 3.
value is 9876.
Enter the group name or leave blank.4.
Select 5. Save.
Select 6. Reboot.
Audio Config – Allows you to customize audio tones played by the device in various situations. All options can be
left as default.
Clock Config – Not applicable for this device. The wall Intercom with clock will enable this section to set the
clock time.
Event Config – Allows you to have the device notify a logging event server of various activities. All options can be
left at default.
Update Firmware – Allows you to update the firmware on the device. See CyberData manual for updating firm-
ware if necessary.