Product specifications

Installing the VoIP Paging Amplifier

Configure the Paging Amplifier Parameters

VoIP Paging Amplifier Operations Guide 930185B CyberData Corporation

2.3.3 Set up the Paging Amplifier

1. Click the Speaker Setup button to open the Speaker Setup page.

Figure 2-13. Paging Amplifier Setup

2. On the Paging Amplifier Setup page, enter values for the parameters indicated in Table 2-10.

Table 2-10. Paging Amplifier Setup Parameters

Web Page Item Description

Device Name Enter a descriptive name for this device (if desired).

Select Speaker Function Select SIP or MGROUPS.

Change Web Access Username Use this field to change the Web Access Username.

Change Web Access Password Use this field to change the Web Access Password.

Re-enter New Password Use this field to re-enter a new password.

Speaker Tone Before Paging Enable/Disable the speaker tone (beep) before each page.

Speaker Tone After Initialization Enable/Disable the speaker tone (beep) after the system

startup.

VOIP PAGING AMPLIFER