Product specifications

CyberData Corporation 930185B VoIP Paging Amplifier Operations Guide
Installing the VoIP Paging Amplifier
Configure the Paging Amplifier Parameters
20
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the speaker if appropriate.
4. Connect the speaker to the target network.
5. From a system on the same network as the speaker, open a browser with the new IP address of
the speaker.
DNS Server 2* Enter the DNS Server 2 address.
Click this button to save your configuration settings. Changing a
parameter that has an asterisk next to it will cause a system reboot
when saved.
Link to the Speaker Setup page.
Link to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
Table 2-9. Network Setup Parameters
Web Page Item Description