Product specifications

Installing the VoIP Paging Amplifier
Configure the Paging Amplifier Parameters
VoIP Paging Amplifier Operations Guide 930185B CyberData Corporation
19
2.3.2 Configure the Network Parameters
1. Click the Network Setup button to open the Network Setup page (Figure 2-12).
Figure 2-12. Network Setup Page
2. On the Network Setup page, enter values for the parameters indicated in Table 2-9.
Link to the Upgrade Firmware web page.
Table 2-8. Home Page Overview
Web Page Item Description
Table 2-9. Network Setup Parameters
Web Page Item Description
IP Addressing* Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
Table 2-9. If you select DHCP,
go to Step 3.
IP Address* Enter the static IP address.
Subnet Mask Enter the Subnet Mask address.
Default Gateway Enter the Default Gateway address.
DNS Server 1* Enter the DNS Server 1 address.
VOIP PAGING AMPLIFER