Product specifications

Installing the VoIP Intercom

Configure the Intercom Parameters

Operations Guide 930242F CyberData Corporation

2.1.4.1 Point-to-Point Configuration

When the board is set to not register with a SIP server (see Figure 2-21), it's possible to set the

intercom to dial out to a single endpoint.

In this case, the dial-out extension should be the IP address of the remote device. The Intercom can

also receive Point-to-Point calls. The delayed DTMF functionality is available in the Point-to-Point

Mode.

Note Receiving point-to-point SiP calls may not work with all phones.

Figure 2-21. SIP Setup Page Set to Point-to-Point Mode

Board is set to not register with a SiP server