Product specifications

Installing the VoIP Intercom

Configure the Intercom Parameters

Operations Guide 930242F CyberData Corporation

2.1.4 Configure the SIP Parameters

1. Click SIP Setup to open the SIP Setup page (Figure 2-20).

Note For specific server configurations, go to the VoIP Intercom product page at:

http://www.cyberdata.net/support/voip/index.html

Figure 2-20. SIP Setup Page

2. On the SIP Setup page, enter values for the parameters indicated in Table 2-7.

Table 2-7. SIP Setup Parameters

Web Page Item Description

SIP Server* Enter the SIP server represented as either a numeric IP

address in dotted decimal notation or the fully qualified

host name (FQHN) up to 64 characters.

Outbound Proxy Enter the Outbound Proxy as either a numeric IP address

in dotted decimal notation or the fully qualified host name

(FQHN) up to 64 characters.

Remote SIP Port* Enter the Remote SIP Port number (default 5060).

Local SIP Port* Enter the Local SIP Port number (default 5060).

SIP User ID* Enter the SIP User ID (up to 25 alphanumeric characters).