Product specifications

VoIP Paging Gateway Operations Guide 930098E CyberData Corporation
4. On the Gateway Setup page, enter values for the parameters indicated in Table 2-3.
To change the default Web access Username and Password, complete the following steps:
1. Enter the new Username from four to 25 alphanumeric characters in the Change Username
field. The Username is case-sensitive.
2. Enter the new Password from four to 20 alphanumeric characters in the Change Password field.
The Password is case-sensitive.
3. Enter the new password again in the Re-enter New Password field.
4. Select Save Settings.
Table 2-3. Gateway Setup Parameters
Web Page Item Description
Device Name Enter the name of the device.
Change Web Access Username Use this field to change the Web Access Username
Change Web Access Password Use this field to change the Web Access Password
Re-enter New Password Use this field to re-enter a new password
Ring Out This selects the option for the gateway to either provide a
ring to the attached device or to connect without ringing.
Select Yes or No whether you want to enable the Ring.
Zone Digits (0-2) Selecting 0 Zone digits enables the caller to connect directly
to the attached device without having to enter in a DTMF
tone.
Selecting either 1 or 2 digits forces the entry of the DTMF
tones.
Zone Enter the Zone number to be tested.
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Click on this button to do an audio test. Generates a voice
message for testing the speaker audio quality and volume.
Link to the Network Setup web page.
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
Link to the Home page.