Product specifications

VoIP Paging Gateway Operations Guide 930098E CyberData Corporation
3. On the Home Page, review the setup details and navigation buttons described in Table 2-1.
At this point you can do the following:
● Review the VoIP Paging Gateway’s Current Settings. Use the Test/Reset switch to restore the
factory default settings. See
Section 2.3.6, "Restore the Factory Default Settings as Required" .
● Configure the network parameters. Click Network Setup and see Section 2.4.3, "Configure the
Network Parameters" for instructions.
● Configure the VoIP Paging Gateway parameters. Click Gateway Setup and see Section 2.4.4,
"Change the Default Username and Password" for instructions.
● Configure the SIP parameters. Click SIP Setup and see Section 2.4.6, "Configure the SiP
Parameters".
Note Click the Upgrade Firmware button any time that you need to upload new versions of the
firmware or Reboot the VoIP Paging Gateway. See
Section 2.5, "Upgrading the Firmware"
and Section 2.6, "Rebooting the VoIP Paging Gateway" for instructions.
Table 2-1. Home Page Overview
Web Page Item Description
Device Name Shows the device name.
Serial # Device serial number.
Ethernet Address Device ethernet address.
IP Addressing Shows the current IP addressing setting (DHCP or static).
IP Address Shows the current IP address.
Subnet Mask Shows the current subnet mask address.
Default Gateway Shows the current default gateway address.
Link to the Network Setup web page.
Link to the Gateway Setup web page.
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.