Product specifications

VoIP Paging Gateway Operations Guide 930098E CyberData Corporation
2.3.4 Connect to a Paging Device
You can broadcast test messages via two different paging devices:
● A paging amplifier, which you use for normal paging operations, broadcasts the test message to
the speakers in a specified paging zone. To do so, you need to first see
Section 2.3.4.1, "Connect
the VoIP Paging Gateway to a Paging Amplifier".
● Via a Plain Old Telephone (POT), which broadcasts the test message to you over the phone. See
Section 2.3.4.2, "Connect the VoIP Paging Gateway to a Telephone".
2.3.4.1 Connect the VoIP Paging Gateway to a Paging Amplifier
Plug one end of a modular telephone cord into the Paging Gateway Line Out port. Plug the other
end into your paging amplifier.
Figure 2-5. Connecting to a Paging Amplifier
2.3.4.2 Connect the VoIP Paging Gateway to a Telephone
Plug one end of a modular telephone cord into the Paging Gateway Line Out port. Plug the other
end into a touch tone telephone.
48VDC