Product specifications

VoIP Paging Gateway Operations Guide 930098E CyberData Corporation
2.3.3 Confirm that the VoIP Paging Gateway is Working Properly
The indicator lights on the front of the VoIP Paging Gateway verify the unit’s operations.
Figure 2-4. Paging Gateway Indicator Lights
2.3.3.1 Confirm Power on, Network Connectivity, and Connection Speed
When you plug in the Ethernet cable or power supply:
● The round, blue Status light on the front of the VoIP Paging Gateway comes on indicating that
the power is on. Once the device has been initialized, this light blinks at one second intervals.
● The square, green Link light above the Ethernet port indicates that the network connection has
been established. The Link light changes color to confirm the auto-negotiated baud rate:
• This light is yellow at 10 Mbps.
• It is orange at 100 Mbps.
● The green Paging light comes on after the device is booted and initialized. This light blinks
when a page is in progress.
2.3.3.2 Verify Network Activity
The square, yellow Act light blinks when there is network activity.
Test/Reset switch
On when network connection is established
Link
Orange when baud rate = 100Mbps
Yellow when baud rate = 10Mbps
Blinks to indicate network activityAct.
Status
Paging
Blinks when unit is up and running
Blinks when unit is paging