Product specifications

VoIP Paging Gateway Operations Guide 930098E CyberData Corporation
2.2 Typical Installation
Figure 2-1 illustrates how the VoIP Paging Gateway is normally installed as part of a paging system.
Figure 2-1. Typical Installation
Complete the following steps after installation:
1. Call to make a page. The VoIP Paging Gateway generates a tone over the phone.
2. When you hear the tone, enter the two-digit code for the zone that you want to page.
• The VoIP Paging Gateway sends the code to the paging amplifier.
• When the paging amp acknowledges the code, the VoIP Paging Gateway generates another tone
to the phone.
3. When you hear the tone, you can begin paging.
Paging Amplifier
VoIP Phone
IP PBX
PoE VoIP Paging Gateway
Paging Speakers
FXO
FXS