Product specifications

Implementing the VoIP Paging Gateway
VoIP Paging Gateway Operations Guide 930098C CyberData Corporation
19
Figure 2-10. Gateway Configuration Page
To broadcast a test message to a specific paging zone.
1. Enter the paging Zone you
want to test.
2. Click Audio
Test. The VoIP Paging Gateway sends a brief audio message to that zone. Notice
that the round, green Paging light below the Status light blinks when a page is in progress
2.4.6 Configure the SiP Parameters
The SIP parameters enable the VoIP Paging Gateway to contact and register with the SIP server. On
the Home page, click SIP Setup to open the SIP Configuration page.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]