Product specifications

CyberData Corporation 930098C VoIP Paging Gateway Operations Guide
Implementing the VoIP Paging Gateway
18
To change the default Web access Username and Password:
1. Enter the new Username from four to 25 alphanumeric characters in the Change Use
rname
field. The Username is case-sensitive.
2. Enter the new Password from four to 20 alphanumeric
characters in the Change Password field.
The Password is case-sensitive.
3. Enter the new password again in the Re-ent
er New Password field.
4. Click Save Se
ttings.
2.4.5 Broadcast a Test Message to a Specific Paging Zone
Once the VoIP Paging Gateway is set up and configured, you can broadcast test messages to
different paging zones that you specify. On the Home page, click Gateway Setup to open the
Gateway Configuration page.
Note You can broadcast a test message to all paging zones using the Test/Rese
t switch on the
back of the VoIP Paging Gateway.Refer to Section 2.3.5, "Broadcast a test message to all
paging zones"
for instructions.
Click on this button to do an audio test. Generates a voice
message for testing the speaker audio quality and volume.
Link to the Network Setup web page.
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
Link to the Home page.
Table 2-3. Gateway Setup Parameters (continued)
Web Page Item Description
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]