Product specifications

CyberData Corporation 930098C VoIP Paging Gateway Operations Guide
Implementing the VoIP Paging Gateway
12
2.4 Configuring the VoIP Paging Gateway
Perform the following steps to configure the VoIP Paging Gateway online:
Gather the Required Configuration Information
Log in to the Configuration GUI
Configure the Network Parameters
Change the Default Username and Password
Configure the SiP Parameters
2.4.1 Gather the Required Configuration Information
Have the following information available before you configure the VoIP Paging Gateway.
2.4.1.1 Static or DHCP Addressing?
Know whether your system uses static or dynamic (DHCP) IP addressing. If it uses static
addressing, you also need to know the values to assign to the following VoIP Paging Gateway
parameters:
IP Address
Subnet Mask
Default Gateway
2.4.1.2 Username and Password for Configuration GUI
Determine the Username and Password that will replace the defaults after you initially log in to the
configuration GUI.
The Username is case-sensitive, and must be from four to 25 alphanumeric characters long
The Password is case-sensitive, and must be from four to 20 alphanumeric characters long
2.4.1.3 Zone Numbers for Testing Purposes
To audio test the VoIP Paging Gateway you need to enter the zone number you are testing. Be sure
to have this information on hand so that you can audio test the gateway with each paging zone.
2.4.1.4 SIP Settings
To configure the SIP parameters, determine whether you want to register the server. If you do,
determine the number of minutes the registration lease remains valid, and whether you want to
automatically unregister when you reboot. To configure the SIP parameters, you also need to
determine the values for these parameters:
SIP Server IP Address
Remote and Local SIP Port Numbers
SIP User ID, and Authenticate ID and Password for this User ID
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299