Product specifications

Implementing the VoIP Paging Gateway
VoIP Paging Gateway Operations Guide 930098C CyberData Corporation
9
2.3.4.1 Connect the VoIP Paging Gateway to a Paging Amplifier
Plug one end of a modular telephone cord into the Paging Gateway Line Out port. Plug the other
end into your paging amplifier.
Figure 2-5. Connecting to a Paging Amplifier
2.3.4.2 Connect the VoIP Paging Gateway to a Telephone
Plug one end of a modular telephone cord into the Paging Gateway Line Out port. Plug the other
end into a touch tone telephone.
2.3.5 Broadcast a test message to all paging zones
The Test/Reset switch is located on the back of the VoIP Paging Gateway. It enables testing to all
paging zones, and lets you restore the VoIP Paging Gateway to its factory default settings.
48VDC
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]