Product specifications

Installing the VoIP V2 Speaker

Configure the Speaker Parameters

Operations Guide 930274R CyberData Corporation

4. Click the Update Firmware button to open the Upgrade Firmware page. See Figure 2-27.

Figure 2-27. Upgrade Firmware Page

5. Click Browse, and then navigate to the location of the V2 Speaker firmware file.

6. Click Submit.

Note This starts the upload process. Once the V2 Speaker has uploaded the file, the Uploading

Firmware countdown page appears, indicating that the firmware is being written to flash.

The V2 Speaker will automatically reboot when the upload is complete. When the

countdown finishes, the Upgrade Firmware page will refresh. The uploaded firmware

filename should be displayed in the system configuration (indicating successful upload and

reboot).

Note The way that the integrity of the configuration file is validated has changed. There is no

problem with updating the firmware but if you downgrade (or downgrade, make some

changes, and then upgrade again) the device may think that the configuration is corrupt and

restore defaults.