Product specifications
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Operations Guide 930274R CyberData Corporation
39
On the Audio Configuration page, enter values for the parameters indicated in Tabl e 2-11.
Note Each entry on the Audio Configuration page replaces one of the stock audio files on the
board. When the input box displays the word default, the V2 Speaker is using the stock
audio file. If that file is replaced with a user file, it will display the uploaded filename.
Table 2-11. Audio Configuration Parameters
Web Page Item Description
Audio Files
0-9 The name of the audio configuration option is the same as the spoken audio that
plays on the board (24 character limit).
'0' corresponds to the spoken word “zero.”
'1' corresponds to the spoken word “one.”
'2' corresponds to the spoken word “two.”
'3' corresponds to the spoken word “three.”
'4' corresponds to the spoken word “four.”
'5' corresponds to the spoken word “five.”
'6' corresponds to the spoken word “six.”
'7' corresponds to the spoken word “seven.”
'8' corresponds to the spoken word “eight.”
'9' corresponds to the spoken word “nine.”
Dot Corresponds to the spoken word “dot.” (24 character limit)
Audiotest Corresponds to the message “This is the CyberData IP speaker test message...”
(24 character limit)
Pagetone Corresponds to a simple tone used for beep on initialization and beep on page
(24 character limit).
Your IP Address is Corresponds to the message “Your IP address is...” (24 character limit).
Rebooting Corresponds to the spoken word “Rebooting” (24 character limit).
Restoring default Corresponds to the message “Restoring default” (24 character limit).
Ringback Tone This is the ringback tone that plays when calling a remote extension
(24 character limit).
Ring Tone This is the tone that plays when set to ring when receiving a call
(24 character limit).
Night Ring Specifies the ringtone for nightring. By default this parameter uses the same audio
file that is selected for the Ring Tone parameter.
The Browse button will allow you to navigate to and select an audio file.
The Play button will play that audio file.
The Delete button will delete any user uploaded audio and restore the stock audio
file.