Product specifications

Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Operations Guide 930274R CyberData Corporation
33
2. On the Nightringer Configuration page, enter values for the parameters indicated
in Ta b l e 2-9.
Web Page Item Description
Enable Nightringer When the nightringer is enabled, the ceiling speaker will
attempt to register a second extension with the SIP server.
Any calls made to this extension will play a ringtone.
Nightringer Settings
SIP Server Type the SIP server represented as either a numeric IP
address in dotted decimal notation.
Remote SIP Port Type the Remote SIP Port number (default 5060)
(8 character limit).
Local SIP Port Type the Local SIP Port number (default 5060)
(8 character limit).
Note: Th
is value cannot be the same as the Local SIP Port*
found on the SIP Configuration Page.
User ID Type the Us
er ID (up to 64 alphanumeric characters).
Authenticate ID Ty p e the A
uthenticate ID (up to 64 alphanumeric
characters).
Authenticate Password Type the A
uthenticate Password (up to 64 alphanumeric
characters).
Re-registration Interval (in seconds)* Type the SIP Registration lease time in minutes (default is
60 min
utes) (8 character limit). Re-registration Interval (in
seconds)*
Click the Sa
ve button to save your configuration settings.
Note: Y
ou need to reboot for changes to take effect.
Click on the Rebo
ot button to reboot the system.
3. After changing the parameters, click on the Save button.
Table 2-9. Nightringer Configuration Parameters