Product specifications

Installing the VoIP V2 Speaker
Device Configuration
Operations Guide 930274R CyberData Corporation
12
2.2.2 Installation Options
This section shows various installation options for the V2 Speaker.
2.2.2.1 V2 Speaker with an External Device
In Figure 2-4, when the V2 Speaker is called from a remote phone, the relay on the speaker can be
programmed to drive an external device such as an alert strobe. This external device may also be
addressed from a separate Unified Communication (UC) server.
Figure 2-4. V2 Speaker with Alert Strobe
Alert Strobe
Speaker
External Device
Such as an
Electric Door Strike
or Strobe Light
AC or DC
Power Source
as Required by
an External Device
Output Contacts
AC or DC-rated
Depending Upon
External Device
Requirements
AUX SPEAKER (-)
AUX SPEAKER (+)
GND
LINE OUT (-)
LINE OUT (+)
+5V OUT
RELAY NO
RELAY COM
AUX POWER (-)
AUX POWER (+)
(+12VDC @ 1A)
J10
J9