Product specifications

Installing the Singlewire-enabled Speaker

Upgrade the Firmware and Reboot the Singlewire-enabled Speaker

Operations Guide 930463A CyberData Corporation

4. Click the Update Firmware button to open the Upgrade Firmware page. See Figure 2-14.

Figure 2-14. Firmware Upgrade Page

5. Click Browse, and then navigate to the location of the Singlewire-enabled Speaker firmware

file.

6. Click Submit.

Note This starts the upload process. Once the Singlewire-enabled Speaker has uploaded the file,

the Uploading Firmware countdown page appears, indicating that the firmware is being

written to flash. The Singlewire-enabled Speaker will automatically reboot when the upload

is complete. When the countdown finishes, the Upgrade Firmware page will refresh. The

uploaded firmware filename should be displayed in the system configuration (indicating

successful upload and reboot).

Note The way that the integrity of the configuration file is validated has changed. There is no

problem with updating the firmware but if you downgrade (or downgrade, make some

changes, and then upgrade again) the device may think that the configuration is corrupt

and restore defaults.